Problems With Mini Washer Dryer Combo

!±8± Problems With Mini Washer Dryer Combo

It might sound great to have a mini washer dryer because it has two functions in one. However, there are also problems that you will experience with that as well. What do I mean by that? You will find out about that in this article.

1.) It takes much longer to get your clothes washed and dried. Most consumers say that the total time to get their clothes done is about 2 hours. If you use a washing machine and a dryer separately, it probably takes you about 1 hour. Of course, this also depends on the brand and speed of your washer. Unfortunately, none of the mini washer dryer that is out can get the job done fast.

2.) You cannot put much clothes in there. There is a reason why it is described as mini because it is very small. If you are living with a family, then this is not the right washer for you. However, it is great for someone who is living alone. Even if you are living alone, you won't be able to put a large load of clothes in there. Since one wash already takes a long time to finish, two or more will feel like it is taking forever.

3.) It is hard to find replacement parts. It is like buying an exotic car because not many consumers purchase the mini washer dryer. You will have a hard time finding people to service it as well finding parts in stores to help fix the washer.

4.) Most of these are not reliable. There are many complaints about flooding or problems with the dryer not heating up. Please look at reviews online carefully to make the right decision.

Problems With Mini Washer Dryer Combo

Running Sports Watches For Sale Lowest Price Cloth Prefold Diapers Silicone Sport Watch Fast

My Washer Is Overflowing, What Could Be The Problem?

!±8± My Washer Is Overflowing, What Could Be The Problem?

If the problem you are having with your washer is that it keeps filling with water and overflows.
There are two things you will need to check.

1. The water valve

The water valve has two solenoids. These solenoids open the water valve ports when electricity flows through the solenoids.

When the electricity stops flowing through the solenoids the ports in the water valve close and no water should flow in to the washer. If your washer is overflowing, do the following to see if it is a bad water valve.

Set the washer to fill, let it fill for a minute or so. After is filling for a minute disconnect the washer from the wall outlet. Repeat this procedures a couple of times. If the washer continues taking water after is disconnected from the wall outlet, the water valve is bad.

If the washer stops taking water when it is disconnected from the wall outlet, check the water level switch.

2. The water level switch

The water level switch controls the amount of water that goes in to the washer tub, according to your selection.

This is the way to test the water level switch. If the washer keeps filling and the motor won't start agitating, most likely you have a bad water level switch.

Those where the two parts that have to do with the washer overflowing. Just make sure that if you are going to replace any of these parts, make sure that the washer is disconnected from the wall outlet before doing any work.

My Washer Is Overflowing, What Could Be The Problem?

French Luggage Coupon Eau De Cologne Men Fast